Description: This is for a high quality components kits to assemble your own Adlib clone audio card. Keep in mind that this card requires -5v, so if you are using an ATX to AT power supply adapter, you will need to either use a Voltage Blaster or similar. This kit DOES NOT include the required ICs. You will need to source them separately. Most of them can be purchased at Mouser or Digi-Key, but some chips will need to be bought from either eBay or Aliexpress. We decided not to include the IC’s due to the fact that some customers will need the complete set, some will already have half of them, etc. In addition, some customers will want specific IC’s or New or Used. We decided it was better to leave that up to the customer. This kit DOES NOT include the ISA bracket. There is a blank available at Mouser/Digi-Key (Part# 534-9202). You have to drill two 7mm or 9/32 holes in the blank bracket for the 3.5mm audio jack and potentiometer. Again, some customers will want this, some will not so we decided not to include it. If there is enough demand, we might start carrying the brackets as a separate item. I have created a shared Mouser project to purchase the required IC's (Excluding the Yamaha Chips) here: https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=4f04b26fcc This kit DOES include everything else you need to assemble the Adlib card including the PCB, Passive Components, and Double Wipe Sockets for each of the ICs. We have bagged and labeled the components with values and quantities to make the assembly as easy as possible.Here is a list of the included components:1 x Monotech Adlib Clone PCB (ENIG) 3 x 10 Ohm Resistor1 x 1.5K Ohm Resistor6 x 2.2K Ohm Resistor2 x 8.2K Ohm Resistor4 x 10K Ohm Resistor1 x 12K Ohm Resistor1 x 10K Ohm POT1 x 270 pF Capacitor1 x 1 nF Capacitor4 x 4.7 nF Capacitor1 x 47 nF Capacitor11 x 100 nF Capacitor1 x 4.7 uF Capacitor6 x 10 uF Capacitor1 x 220 uF Capacitor1 x 1N4148 Diode1 x 2N3904 Transistor1 x 3.5mm Audio Jack2 x 8P Dual Wipe Sockets2 x 14P Dual Wipe Sockets3 x 16P Dual Wipe Sockets1 x 24P Dual Wipe Socket All of the component locations & values are silk-screened on the board, which makes assembly easy. We are also including some tips and tricks for assembly, and some warnings for common mistakes. Each kit will be carefully packaged for safe shipment. We appreciate your support for our small business!
Price: 34.69 USD
Location: Bonney Lake, Washington
End Time: 2024-10-21T22:59:02.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Country/Region of Manufacture: United States
