Description: Material: PLADimensions: .6" H x .5" L x .5" W T Cell refill adapter for butane! This adapter is used to refill T Cell bottles after they have been modified. To modify them you must make sure the bottle is completely empty and use a paper clip to make sure by poking the brass valve. Gently take a pair of Needle Nose Pliers and grab the brass piece below the gasket. Pull straight out until the valve pops out. Use a drywall screw and screw it into the top of the bottle. Then take pliers and pull on the screw until the check valve pops out. The check valve looks like a little cylinder and might have some blue on it. Insert brass valve back into Butane Cartridge. (Butane Adaptor is now ready for use!)Finally, place the adapter on the butane bottleFill with Universal Gas Butane Lighter Fluid by inserting the tip on the other side of the adaptor. ***Note: blue adaptor shown in pictures is not included. These plastic tip adaptors are typically found on the lid of universal butane cans***Lightly apply pressure, while steadily holding the adaptor in place to make a good seal for refilling the cartridge. (too much pressure will cause in leaking of butane gas)***Disclaimer: Use these adaptors at your own risk, I am not responsible for any injuries that may happen when using this device. (personally I have never had any issues using this adaptor). Do this in a well ventilated area because they may leak a little bit. This is a 3D printed part. Tools and accessories not included*** -Color may vary - If you have any questions please do not hesitate to reach out. Thank you for your support! Warranty Disclaimer:3DTangibleIdeas Warrants the quality of the product only. The application and processing of 3DTangibleIdeas products is beyond our control and therefore is the sole responsibility of the user and/or dealer. Due to varying procedure and conditions 3DTangibleIdeas written or verbal instructions are based on experience with our products and we strongly recommend thorough inspection and testing of the product prior to actual use. In the event of a defective product claim, 3DTangibleIdeas requires samples showing the defect for inspection and testing to verify the alleged claim within 14 days of delivery. This may be done directly by reaching out to our team via message or email. In the event of confirmation that the status of the product in question is in fact defective, 3DTangibleIdeas warrants the replacement value of our products only. We will not exceed the value of the product involved. 3DTangibleIdeas is not responsible for consequential damages. Return Policy:In the event of a potential return, the product must be kept in its original packaging and condition. The purchaser has 14 days to return the order and is responsible for the return shipping fee involved in the process. Liability Disclaimer: The commissioner is not liable for any damages arising in contract, tort, or otherwise from the use of or inability to use this product. The information on this site is provided for general informational purposes only and comprises of public information provided online, they do not constitute legal, or other professional advise. The commissioner is not responsible for the condition of the item after it has been delivered. We make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of any information.
Price: 13.99 USD
Location: Huntsville, Texas
End Time: 2023-11-22T22:28:29.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: thermcell
Type: Repellent
Available Variations
Color: Adaptor
Price: 13.99 USD
Available Quantity: 55
Quantity Sold: 21
