NOCO GENPRO10X2 12V 2-Bank 20-Amp On-Board Battery Charger

Description: The GENPRO10X2 is a 12-volt single bank battery charger, battery maintainer, trickle charger, and battery desulfator. It is rated at 20-amps (10-AMPS PER BANK), fully automatic, 100% waterproof meant for GENPRO10X2 is built and meant for extreme conditions. This charger is a two-bank onboard battery charger rated at 20-amps (10-amps per bank) for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries. Independently charge and control each battery bank with selectable charging modes - including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode - for all types of lead-acid and lithium-ion batteries. Plug and play, no technical knowledge required! The GENPRO10X2 will safely charge any battery. Detect damaged batteries and intuitively repair them. Actively monitor for long-term battery maintenance and extend battery life. This system allows for continuous operation without user intervention, and zero risk of overcharging your battery. NOCO GENPRO10X2 12V 2-BANK Charger Specs: Battery Voltage Supported: 12V Charger Capacity: 20AH (10AAMPS per banks) Battery Chemistries: Wet, GEL, MF, CA, EFB, AGM, Calcium, Lithium Battery Capacity - Up to 230 Amp-HoursHousing Protection: IP68 Cooling: Natural Convection Line Voltage: 120V to 240V AC Frequency: 50Hz to 60Hz Operating Temperature: -4° to 104° F (-20° to 50° C) Storage Temperature: -22° to 140° F (-30° to 60° C) Relative Humidity: 0 to 95% Non-Condensing Dimensions (LxWxH): 2.9” x 8.1” x 6.5” Weight: 8.47 LBS 3 Year Limited Warranty NOCO GENPRO10X2 Charger Features: Maintenance: All Battery SizesHigh Efficiency Design Charge Down to Zero Volts Advanced Battery Diagnostics Thermal Compensation Built-in Auto Desulfation Wall Mounting Options Redesigned Battery Clamps Short-Circuit Proof and Spark Proof Multi-Voltage. Multi-Chemistry. Multi-Battery Type A multi-functional design that allows you to charge in more ways. Effortlessly charge 12-volt lead-acid and lithium-ion batteries of multiple chemistries (Flooded, gel, maintenance-free and AGM batteries) and types (Starter, deep-cycle, marine, and more). Charge Dead Batteries - Down to ZERO Volts The all-new start-voltage sensor allows the Genius GENPRO10X2 charger to detect and charge dead batteries as low as 1-volt. For extremely dead batteries lower than 1-volt, manually turn on force mode to detect and charge batteries all the way down to zero volts. Thermal Compensation - Optimized For Any Climate The new integrated thermal sensor automatically monitors and adjusts the charging cycle based on fluctuations of ambient temperature, limiting the chance of under-charging or over-charging, providing a more accurate and fully charged battery. Avoids under-charging in cold weather down to -4F and avoids over-charging in hot weather up to 104F. Completely Automatic The GENPRO10X2 automatically detects sulfation/acid stratification. If any is found, the GENPRO10X2 will automatically repair and reverse the damage done to the battery, extending the usable life and increasing the performance. Includes: GENPRO10X2 On-Board Charger (2) Self-Tapping Screws User Guide & Warranty Information STORE || CHARGERS || ACCESSORIES NOCO GENPRO10X2 12V 2-Bank 20-Amp On-Board Battery Charger The GENPRO10X2 is a 12-volt single bank battery charger, battery maintainer, trickle charger, and battery desulfator. It is rated at 20-amps (10-AMPS PER BANK), fully automatic, 100% waterproof meant for GENPRO10X2 is built and meant for extreme conditions. This charger is a two-bank onboard battery charger rated at 20-amps (10-amps per bank) for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries. Independently charge and control each battery bank with selectable charging modes - including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode - for all types of lead-acid and lithium-ion batteries. Plug and play, no technical knowledge required! The GENPRO10X2 will safely charge any battery. Detect damaged batteries and intuitively repair them. Actively monitor for long-term battery maintenance and extend battery life. This system allows for continuous operation without user intervention, and zero risk of overcharging your battery. NOCO GENPRO10X2 12V 2-BANK Charger Specs: Battery Voltage Supported: 12V Charger Capacity: 20AH (10AAMPS per banks) Battery Chemistries: Wet, GEL, MF, CA, EFB, AGM, Calcium, Lithium Battery Capacity - Up to 230 Amp-HoursHousing Protection: IP68 Cooling: Natural Convection Line Voltage: 120V to 240V AC Frequency: 50Hz to 60Hz Operating Temperature: -4° to 104° F (-20° to 50° C) Storage Temperature: -22° to 140° F (-30° to 60° C) Relative Humidity: 0 to 95% Non-Condensing Dimensions (LxWxH): 2.9” x 8.1” x 6.5” Weight: 8.47 LBS 3 Year Limited Warranty NOCO GENPRO10X2 Charger Features: Maintenance: All Battery SizesHigh Efficiency Design Charge Down to Zero Volts Advanced Battery Diagnostics Thermal Compensation Built-in Auto Desulfation Wall Mounting Options Redesigned Battery Clamps Short-Circuit Proof and Spark Proof Multi-Voltage. Multi-Chemistry. Multi-Battery Type A multi-functional design that allows you to charge in more ways. Effortlessly charge 12-volt lead-acid and lithium-ion batteries of multiple chemistries (Flooded, gel, maintenance-free and AGM batteries) and types (Starter, deep-cycle, marine, and more). Charge Dead Batteries - Down to ZERO Volts The all-new start-voltage sensor allows the Genius GENPRO10X2 charger to detect and charge dead batteries as low as 1-volt. For extremely dead batteries lower than 1-volt, manually turn on force mode to detect and charge batteries all the way down to zero volts. Thermal Compensation - Optimized For Any Climate The new integrated thermal sensor automatically monitors and adjusts the charging cycle based on fluctuations of ambient temperature, limiting the chance of under-charging or over-charging, providing a more accurate and fully charged battery. Avoids under-charging in cold weather down to -4F and avoids over-charging in hot weather up to 104F. Completely Automatic The GENPRO10X2 automatically detects sulfation/acid stratification. If any is found, the GENPRO10X2 will automatically repair and reverse the damage done to the battery, extending the usable life and increasing the performance. Includes: GENPRO10X2 On-Board Charger (2) Self-Tapping Screws User Guide & Warranty Information FEATURED NOCO CHARGERS & ACCESSORIESNOCO GENIUS2 Battery Charger and Maintainer 2 AmpSHOP NOW!NOCO GENIUS5 Battery Charger and Maintainer 5 AmpSHOP NOW!NOCO GENIUS1 Battery Charger and Maintainer 1 AmpSHOP NOW!NOCO GENIUS2D 12V 2A Direct-Mount Charger and MaintainerSHOP NOW!NOCO GC004 10' Extension CableSHOP NOW!NOCO GC003 12V Plug Connector - AUX Plug Adapter For NOCO ChargersSHOP NOW!NOCO GC002 Terminal ConnectorSHOP NOW!NOCO GC009 Terminal ConnectorSHOP NOW!PaymentShippingReturnsPayment PaymentShippingReturnsPayment We accept PayPal, Visa, MC, AMEX, and Discover.PaymentShippingReturns Shipping PaymentShippingReturns Shipping Shipping is specific to each of our listings, please view the top of the page for this items shipping method. We primarily ship out via UPS ground and USPS priority mail service. Once the label has been created for your order a tracking number will be uploaded to the eBay platform for full tracking visibility. If your address does not accept USPS packages please let us know in your order comments to ensure we get your package delivered. PaymentShippingReturns ReturnsPaymentShippingReturns Returns We accept returned items purchased directly through High-Tech Battery Solutions, Inc. within 30 days of delivery. To return a product, customers must request a Return Authorization Form from a High-Tech Battery Solutions representative or go through the eBay returns system. Refunds are not guaranteed on Items returned without the correct documentation. Listing and template services provided by inkFrog

Price: 224.95 USD

Location: Twinsburg, Ohio

End Time: 2023-12-23T16:35:48.000Z

Shipping Cost: 0 USD